JVC HM-HDS1EU Instructions Manual page 75

HDD SET UP
8
LIVE MEMORY
OFF
30MIN
1HR
3HR
8
AUDIO REC
NICAM
MONO
VCR SET UP 1
8
NAVIGATION
ON
OFF
8
S-VHS
AUTO
OFF
When this function is set to "30MIN", "1HR" or "3HR", you can enjoy the
selected length of the time for "Live Memory Playback" (
When this function is set to "NICAM", the NICAM audio programme will be
recorded.
When this function is set to "MONO", the Standard (monaural) audio
programme will be recorded.
NOTE:
This function works only on the NICAM bilingual programme.
When a programme is recorded on the cassette with this function set to "ON",
you can use VCR Navigation (
Your recorder can record in S-VHS (Super VHS), S-VHS ET or VHS.
To record in S-VHS:
Set "S-VHS" to "AUTO". Then, insert a cassette marked "S-VHS". The S-VHS
indicator lights up on the front display panel.
The S-VHS recording mode is selected.
To record in S-VHS ET on a VHS cassette:
See "Super VHS ET (S-VHS ET)" on page 39.
To record in VHS:
Insert a cassette marked "VHS".
If the S-VHS ET mode is activated, press S-VHS ET. "S-VHS ET : OFF" appears
on the TV screen, if "O.S.D." is set to "ON".
The VHS recording mode is automatically selected regardless of the "S-VHS"
mode setting.
To record in VHS on an S-VHS cassette:
Insert a cassette marked "S-VHS". The S-VHS indicator lights up on the front
display panel. Then, set "S-VHS" to "OFF". The S-VHS indicator goes off.
The VHS recording mode is selected.
NOTE:
When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS
indicator lights up on the front display panel regardless of the "S-VHS" mode setting.
* The default setting is bold in the table below.
* The default setting is bold in the table below.
pg. 32, 51).
75
EN
pg. 26).