Using The Ptz Feature - JVC VR-N900U Instructions Manual

• You can change the camera number in the [Record
Camera Setting] window. (
and then enter the camera number, you can specify
numbers from 10 to 19. Use the mouse to specify
numbers from 20 upwards.
Note
• When you select a particular camera, the blue bar at the
top of each live image becomes a lighter blue.
Each bar features three-color square indicators with the
following functions.
➀ Event indicator (left indicator: solid yellow)
Lights up when events specified in the [Camera Record
☞
Setting] occur. (
reset the event indicator. The indicator appears black if
event indication has not been specified for the camera in
question, or if no specified events have occurred.
➁ Motion indicator (indicator in the middle, solid red)
Lights up when motion is detected. (
the image bar to reset the event indicator.
➂ Online indicator (right indicator, blinking green)
Blinks every time an image is received from the
camera.
• The image bar displays the name of the camera as well as
the name of the device to which the camera is connected.
• Each image bar will display the word [Live] when live
images are displayed, and the word [Stopped] if the
camera is stopped and live viewing is not possible.
• To enlarge images from a particular camera in a view
using a mouse, double-click the image bar. To return to
normal view, simply double-click the image bar again.
• The event or motion indicator can also be canceled by
pressing the [ALARM CLEAR)] button.
[Output] section
[Event] section
[Live Viewing] window
[PTZ Control] section
[Audio] section
☞
Page 38) If you press 0 first
Page 52) Click the image bar to
☞
Page 54) Click

Using the PTZ Feature

PTZ stands for pan, tilt and zoom. If the camera is a PTZ
camera, you can use the keypad and the [ZOOM IN/
ENTER] button and [ZOOM OUT/CANCEL] button to move
the camera up, down (tilt), right and left (pan) and enlarge
the image (zoom).
Pan/Tilt
1
Press the [PTZ/PRESET] button until the [PTZ/
PRESET] indicator lights up.
The [PTZ/PRESET] indicator switches between lit and
blinking each time the [PTZ/PRESET] button is pressed.
2
Press the arrow buttons on the keypad to
move the camera in the selected direction.
• Pressing the [HOME] (default) button on the keypad
moves the camera to its home position.
Zoom In/Zoom Out
1
Press the [PTZ/PRESET] button until the [PTZ/
PRESET] indicator lights up.
The [PTZ/PRESET] indicator switches between lit and
blinking each time the [PTZ/PRESET] button is pressed.
2
Press the [ZOOM IN/ENTER] button or the
[ZOOM OUT/CANCEL] button.
CAUTION
• The PTZ features are only available if the camera is a
PTZ camera. If the camera is not a PTZ camera, pressing
the button will have no effect.
➀
➁
➂
Note
• Many PTZ cameras may be controlled by pointing and
clicking inside the images from the camera. If you see a
set of crosshairs when placing your mouse pointer over
the images from a PTZ camera, point-and-click control is
supported for the camera.
• The camera cannot be operated in the [Image] window
when the mouse pointer does not change to the cross
shape pointer.
• The mouse pointer may not change to the cross-shape
pointer depending on the type of the PTZ camera.
• The PTZ camera may not operate even though mouse
pointer changed to the cross-shape pointer depending on
the PTZ camera. In this case, use the PTZ navigation
button of the [PTZ control] section to operate the PTZ
camera.
• For PTZ cameras, if your mouse is equipped with a scroll
wheel, you are able to zoom in and out using the scroll
wheel on your mouse.
13