Setting The Image Quality - JVC VR-N900U Instructions Manual

[Number of] seconds pre/post recordings on motion/
event:
You are able to store recordings from periods preceding
and following detected motion and/or specified events.
Specify the number of seconds for which you want to store
images from before and after the recording. Please do not
set it at 0 (zero) second.
If Offline is selected in [Scheduler], images will not be
recorded.
Manual recording, emergency recording and recording
with EXT REC input will not be effected.
● Database Settings
Lets you specify the Database Settings. (
● Motion Detection Settings
Motion Detection:
Lets you specify two parameters for motion detection,
[Sensitivity] and [Threshold]. (
Motion Color:
Lets you specify the color to be used for highlighting
detected motion.
● Exclude Regions Settings (
Lets you specify Exclude Regions Settings, certain areas of
the camera's images in which motion detection is disabled.
Region Color:
This button is disabled.
● Image Quality
Lets you specify image resolution and quality-related
settings.
● Event Notifications
Lets you select events for triggering event indications.
☞
( Page 52)
● Outputs
Let you specify output settings. (
● PTZ Preset Positions
Lets you specify preset positions and patrolling. (
When a configurable camera is selected, this button is
displayed on the right side of the [Output] button.
CAUTION
• When the recording program (recording server) is
operating, the [PTZ Preset Position] button is disabled.
Pause the recording server by clicking the [Service
Manager] button in the [Camera Record Setting] window
☞
( Page 38), and then click the [Pause] button.
• The video or audio will not be recorded while the
recording program (recording server) is paused. Also, the
live images to the surveillance computer are turned off.
• In recording control mode, images will not be recorded
during the offline period specified in the [Scheduler]
settings even when [Always] is selected in [When to store
images].
• Clicking [Cancel] does not cancel image quality and
settings made in another window.
☞
Page 56)
☞
Page 54)
☞
Page 54)
☞
Page 53)
☞
Page 45)

Setting the image quality

When adjusting camera settings, you are able to view the
effect of your settings by clicking the [Preview] button.
1
Select [Camera Record Setting] from the [Main
Menu].
2
Select the camera(s) from the [Device Manager]
and click [Camera Setting].
[Camera Setting] window will be displayed.
3
Click [Image Quality].
[Configure Device] window will be displayed.
CAUTION
• It is recommended to set the image quality to
approximately 24KB. Specifying a higher image quality
may affect the sound.
Example of the [Configure Device] window
Note
• For detailed information, please refer to the user manual
of the cameras.
• The appearance of the [Configure Device] window
depends on camera model.
29