Using Your Views On Different Computers - JVC VR-N900U Instructions Manual

Basic Operation
Always off:
Does not sound alerts when events related to the
camera occur.
Always on:
Play a sound alert each time an event related to the
camera occurs.
CAUTION
• Set the VR-N900U so that the total frame rate that
appears on all surveillance computers is 30 ips or less.
• The recording frame rate may decrease when the image
quality is set to [High] or [SuperHigh (for megapixel)].
• The alert sound at the time of motion detection and on
event will not output from VR-N900U. This function is for
the downloaded VR-N900 Viewer.
4
To adjust the settings on other cameras,
2
repeat steps and
Note
• To adjust the settings of all cameras at once, click the
[Apply To All] button. The adjusted camera settings will be
applied to all cameras in the view.
36
3
.

Using Your Views on Different Computers

Your user settings, including your private views, are stored
on the VR-N900U. This means that you can use your private
views on any surveillance computer (
a [VR-N900 Viewer] and VR-N900U installed and by logging
in with your own user name and password.
1
Click the [Setup] tab in the [VR-N900 Viewer].
CAUTION
• Particular user rights may be required in order to access
the [Setup] tab. When this is the case, consult your
system administrator.
2
Select the folder you want to use in the [Views]
section.
• You can create and edit views.
• Folders to which you cannot edit will be indicated by
padlock icons.
☞
Page 69) that has