NEC Univerge SV8100 Features And Specifications Manual page 244

Issue 12.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-08 Service Code Setup (for Service
Access) – Barge-In
11-16-02 Single Digit Service Code Setup
– Barge-In
15-07-01 Programmable Function Keys
20-02-27 System Options for Multiline
Telephones – ACD Monitor for
Business Mode
20-06-01 Class of Service for Extensions
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
2 - 214
Description/Comments
Determine what the service code
should be for an internal party to
use the Barge-In feature.
Customize the one-digit Service
Codes used for Barge-In.
Assign functions to multiline
terminal line keys.
Select whether or not ACD Call
Monitor provided in the ACD Mode
works in normal business mode.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension ability
to have calls queued if a call rings
the extension when it is busy.
This setting must be Disabled (0)
for the Call Monitoring
Enhancement to function.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 710)
(default not assigned)

Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = Off (ACD Mode)
1 = On (Business
Mode)
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Call Monitoring
Level
2 3


