NEC Univerge SV8100 Features And Specifications Manual page 516

Issue 12.0
Program
Program Name
Number
30-05-20 DSS Console Lamp Table – Hotel
Status Code
30-05-21 DSS Console Lamp Table – VM
Message Indication
30-10-01 DSS Console IP Terminal Setup –
MAC Address
Operation
Calling an extension from your DSS Console:
1. Press the DSS Console key.

If the call voice-announces, you can make it ring by dialing 1.
 If you do not have Handsfree, you must lift the handset to speak.
When the DSS key is...
On
Off
Flashing Fast
Answering a trunk call from your DSS Console:
1. Press the flashing DSS Console key assigned to the trunk.

If you do not have Handsfree, you must lift the handset to speak.
Transferring a call using your DSS Console:
1. Place or answer the call.
2. Press Transfer to transfer the call.
3. Press the DSS key for the extension to receive the transfer.
2 - 486
Define the LED patterns for hotel
status code
#
(Hotel DSS)
consoles.
Define the LED patterns for VM
message indications on the DSS
consoles.
Read Only program that displays
the MAC address of the IP
terminal associated with a DSS
console.
Extension Busy Lamp Field
The assigned extension is...
Description/Comments
on the DSS
#
Busy on a call
Idle
In Do Not Disturb
Direct Station Selection (DSS) Console
UNIVERGE SV8100
Assigned Data
1
0~7
[default = 5 (IL)]
0~7
[default = 3 (RW)]
00-00-00-00-00-00 ~
FF-FF-FF-FF-FF-FF
(Default =
00-00-00-00-00-00)
Level
2 3


