30
Installing the PoE Unit
CAUTION
To install the PoE unit:
Using the mounting hardware provided, mount the unit as required for an AP 7161 pole or wall mount installation.
1.
2.
Connect the earth ground cable to the unit and properly connect the cable to an external ground.
Connect the PoE unit LINE AC port to a 100-240 VAC outlet.
3.
Connect the network LAN cable to the DATA IN port.
4.
5.
Connect Ethernet cable from the DATA PWR OUT port to the GE1/POE port on the access point.
The maximum length allowed for the PoE cables is 100 meters.
AP 7161 Access Point Installation Guide