Tuner; Set Receivable Channels - JVC HM-HDS1U Instructions Manual

Tuner

Turn on the TV and select the AV mode.
yyy
POWER
yyy
HM-HDS1
REC LINK
HDD
MENU NAVI
OK
CH
1
2
1
4
7
<
1
2
OK
INFORMATION
The recorder detects the band (TV or CATV) and selects the
correct band automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
DIGITPURE TECHNOLOGY
STOP PLAY PAUSE REC
S-VHS ET
S-VHS
REW FEW
A. DUB
2 3
5 6
3
8 9
4
0
>
MENU
OK
CH+/–
– +

Set Receivable Channels

TURN ON THE RECORDER
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
EJECT
yy
yy yy
ACCESS TUNER SET SCREEN
VIDEO (M) L – AUDIO – R
S-VIDEO
PAUSE
F - 1
3
1) At the top of Main
Menu screen, move
the arrow to "INITIAL
SET UP" by pressing
@# (or 23), then
press fi (or ∞) or OK.
2) At the Initial Set Up
screen, move the
arrow to "TUNER SET"
by pressing @# (or 23), then press OK.
PERFORM AUTO CHANNEL
SET
4
At the Tuner Set screen,
move the arrow to
"AUTO CHANNEL SET"
by pressing %fi (or 5∞),
then press # (or 3) or
OK.
Receivable channels in
your area are
automatically assigned
to the CH +/– buttons,
and non-receivable
channels are skipped.
If you want to set the
CATV channels,
change the BAND
mode into CATV by
moving the arrow to
"BAND" and pressing # (or 3) or OK. The BAND
mode alternates between TV and CATV by pressing #
(or 3) or OK when BAND is highlighted.
NOTES:
At the end of Auto Channel Set, "SCAN COM-
PLETED" appears on screen.
If the scan was unsuccessful, "SCAN COMPLETED –
NO SIGNAL –" appears on screen. Check the
connections and start again.
RETURN TO NORMAL
SCREEN
5
Press MENU. The Initial Set Up screen appears, then
press MENU again.
13
EN
HDD/VHS SET UP FUNCTION SET UP INITIAL SET UP
TUNER SET INITIAL SET
TUNER SET
BAND
AUTO CHANNEL SET
MANUAL CHANNEL SET
INDEX MENU
SELECT WITH [∞523]
SELECT OK END THEN PRESS [OK]
TUNER SET
BAND CATV
=
AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH[5,∞] THEN[OK]
PRESS[MENU] TO END
AUTO CHANNEL SET
SCANNING...
PRESS[MENU] TO END