Super Vhs Et - JVC HM-HDS1U Instructions Manual

Super VHS ET

Your recorder is equipped with Super VHS ET that makes it
possible to record with S-VHS picture quality on VHS cassettes.
yyy
POWER
yyy
HM-HDS1
REC LINK
HDD
MENU NAVI
OK
CH
S-VHS ET
This facility allows recording with S-VHS picture quality on
VHS cassettes. You can play back those cassettes recorded
in S-VHS ET on a VCR equipped with S-VHS ET.
NOTES:
To obtain the highest quality recording and playback
pictures over a longer period on this model, S-VHS
recording on S-VHS tape is recommended.
You can play back S-VHS ET recordings not only on this
recorder but also on another VHS VCR equipped with S-
VHS ET.
* It is recommended to specifically label S-VHS ET
recordings so you can easily distinguish them from
regular VHS recordings.
S-VHS ET recordings can also be played back on an S-
VHS VCR or a VHS VCR equipped with SQPB (S-VHS
QUASI PLAYBACK) function. However, there may be
cases where S-VHS ET playback is not possible on a
particular VCR.
DIGITPURE TECHNOLOGY
STOP PLAY PAUSE REC
S-VHS ET
S-VHS
REW FEW
A. DUB
ENGAGE S-VHS ET MODE
1
Press S-VHS ET on the front panel. You can check the
current setting ("S-VHS ET : ON" or "S-VHS ET : OFF")
if "SUPERIMPOSE" is set to "ON" (pg. 41). If "S-VHS ET
: OFF" appears on the TV screen, press S-VHS ET again
in about 5 seconds later to set it "ON".
• The S-VHS indicator lights up on the front display
panel.
To cancel S-VHS ET, press the button again.
NOTES:
EJECT
yy
You cannot activate the S-VHS ET function...
yy yy
VIDEO (M) L – AUDIO – R
...while recording is in progress.
S-VIDEO
PAUSE
F - 1
...while timer-recording (incl. Instant Timer Recording
pg. 64) is in progress.
...while Video Calibration (
...when the recorder's power is off.
S-VHS ET does not work with S-VHS tapes.
Frequent still, frame-by-frame and slow-motion playback
may damage the tape and cause picture degradation.
With some tapes, better picture quality may not be
obtained even with S-VHS ET recording. It is recom-
mended that you do test record beforehand to make sure
whether better results can be obtained.
High Grade tapes are recommended for superior results.
Make sure that "VIDEO CALIBRATION" is set to "ON" at
the Function screen (
During S-VHS ET playback, noise may appear depending
on tape quality.
Noise may appear during still, frame-by-frame and slow-
motion playback.
If the playback picture becomes blurred or interrupted,
use a cleaning cassette.
EN
pg. 47) is in progress.
pg. 47).
51