Cable Box Multi-Brand Remote Control - JVC HM-HDS1U Instructions Manual

TV
1
2
1
4
NUMBER
7
<
1
2
OK
–
TV CH –
CABLE BOX BRAND NAME
ARCHER
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
EASTERN
GC BRAND
GEMINI
GENERAL INSTRUMENTS
HAMLIN
JASCO
JERROLD
NOVAVISION
OAK
PANASONIC
PULSER
RCA
REGAL
REGENCY
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
SL MARX
SPRUCER
STARGATE
TELEVIEW
TOCOM
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH
TV/VCR
2 3
5 6
3
8 9
4
0
>
ENTER/OK
TV CH +
+
BRAND CODE
01, 05, 17
01, 17
15, 16, 17, 21, 25
15, 16, 17, 21, 25
02, 08
01, 17
19
15, 16, 17, 21, 25
15
01, 04, 06, 11, 12, 15
10, 18, 19, 23
15
01, 04, 06, 11, 12, 15
02, 08
07, 20
13, 14
15, 16, 17, 21, 25
13, 14
10, 18, 19, 23
19
01, 16, 17
05, 16, 24
02, 08
07, 20
05, 16, 17, 24, 25
13, 14
05, 15, 16, 17, 21, 24, 25
05, 16, 24
01, 04, 16
01, 17
16, 17, 25
03, 09, 22
03, 09, 22
Cable Box Multi-Brand
Remote Control
The recorder's remote control can control functions on the
brands of cable boxes listed below. Some cable box brands
have more than one code. If your cable box does not function
with a specified code, try other codes.
TURN ON THE CABLE BOX
1
Turn the power on using the cable box's remote control.
SET REMOTE CONTROL
MODE
2
Press TV on the remote control when "CABLE DBS"
appears on the display window of the recorder's remote
control.
ENTER CABLE BOX BRAND
3
Enter your cable box brand code using the NUMBER
keys, then press OK.
Follow the example shown at bottom left.
Once you have set the remote control to operate the
cable box, you don't have to repeat this step until you
replace the remote control's batteries.
OPERATE CABLE BOX
4
First, press POWER to see if the cable box's power goes off
as it should. If it does, try other functions (TV CH +/– and
the NUMBER keys can be used to operate the cable box).
For some brands of cable box, you must press ENTER
after having pressed the NUMBER keys.
To return the remote to the recorder control, press
HDD or VHS (or S-VHS).
NOTES:
You must set the cable box brand for your remote control and
the cable box brand for your Controller (
The list of cable box brands that can be controlled by your
remote control is different from the list of brands that can be
controlled by your controller.
Depending on the type of cable box, there may be cases
where some or all functions cannot be operated using the
remote control.
It's not possible to set the remote control for both your cable
box and a DBS receiver at the same time. You can only set the
remote control to operate one of these units at a time.
83
EN
pg. 16) separately.