UNIVERGE SV8100
When using Netlink and UCB, the trunks and extensions on the remote sites are supported
for UCB (Version 2.51 or higher).
When using Mobile Extension in a NetLink Network, the ISDN/PRI must be used in the
Primary System.
InMail is not supported in a NetLink network.
When using Set Relocation, and a terminal is re-located from one physical system to
another physical system, route programming must be made accordingly for 911 calls.
If IPKII migration is used in a NetLink environment, it must be the primary system.
FoIP (Fax over IP) is supported in a NetLink Network.
TDM
Terminal
Primary
IP Terminal
System
(DT700)
TDM
Secondary
Terminal
System 1
TDM
Secondary
Terminal
System 2
P = Primary
S1 = Secondary System #1
S2 = Secondary System #2
The number of conference blocks in a NetLink network is the same as a stand-alone
system.
Invalid data is displayed in the LCD of the terminal if Program 51-01 is enabled and a
PZ-ME50-US is not installed.
Restrictions:
All IP Trunks and IP Terminals must be connected to the Primary System.
The number of total ports depends on the Primary System.
System ID (Program 51-01-02) must be unique for each system in a NetLink network.
SV8100 NetLink
Table 2-48 VoIP Resource Chart
Primary System
TDM
IP Terminal
Terminal
(DT700)
0
P:1
P:1
0
P:1
S1:1
S1:1
P:2
P:1
S2:1
S2:1
P:2
Secondary 1
CO
IP
TDM
Analog
Trunk
Terminal
/Digital
0
P:1
P:1
S1:1
P:1
P:2
S1:1
P:1
P:2
0
S1:1
S1:1
P:1
P:2
S1:1
S2:1
S2:1
S2:1
Issue 5.0
Secondary 2
CO
TDM
CO
Analog
Terminal
Analog
/Digital
/Digital
P:1
P:1
P:1
S1:1
S2:1
S2:1
S1:1
S2:1
S2:1
0
P1:1
S1:1
S2:1
S2:1
S1:1
0
0
S2:1
2 - 1293