Table 2-84 Error Messages And Causes - NEC Univerge SV8100 Features And Specifications Manual

Issue 5.0
Program
Program Name
Number
90-02-03 Programming Password Setup –
User Level
Troubleshooting
The table below shows possible Error messages and Causes:
Error Message
VMDB is not attached
Mailbox XXX does not exist.
(XXX = mailbox number)
The mailbox is being used by another
session
There is no available space in the CF.
The file is being used by another session.
Please try again later.
The selected file has already been deleted.
The file is being used by another session.
Please try again later.
The selected file has already been deleted.
Cannot upload the file since the original file
is being used by another session. Please
try again later.
2 - 1646
Description/Comments
Set the system password user
levels.

Table 2-84 Error Messages and Causes

The PZ-VM21 is not attached.
The mailbox does not exist
When the mailbox is being used by another session, either PC or
telephone.
When there is no available space in the CF.
When the file to be downloaded is being used by another
session, either PC or telephone.
When the file selected for download has already been deleted.
When the file selected for deletion is being used by another
session.
When the file selected for deletion has already been deleted.
When the file to be replaced is being used when trying to upload
the replacement.
Voice Response System (VRS) Upload Download Audio
UNIVERGE SV8100
Assigned Data
0 = Prohibited User
1 = MF (Manufacturer
Level)
2 = IN (Installer Level)
3 = SA (System
Administrator Level 1)
4 = SB (System
Administrator Level 2)
5 = UA (User
Programming Level 1)
Refer to the SV8100
Programming Manual
for default settings.
Cause
Level
1 2 3
