Table of Contents
Advertisement
Chapter 3 Setup
3.
After a while, the following message is displayed on the screen. (The on-screen message depends
on your environment.)
By pressing the function key following messages, you can call the functions below upon completion of
POST.
<F9> key:
<F10> key:
<F11> key:
<F12> key:
Regarding designated utilities, see instruction documents attached to each option board.
Necessary key inputs are different depending on option boards installed, so you are requested to
operate according to messages.
4.
The OS starts when POST is completed.
POST error messages
When POST detects an error, it displays an error message on the screen. For descriptions of error messages,
causes, and countermeasures, see Chapter 3 (1. IML Error Message) in "Maintenance Guide".
Start System Utility. See Chapter 3 (2 Description on System Utility).
Run EXPRESSBUILDER. For details, see Chapter 3 (4. EXPRESSBUILDER and
Starter Pack).
Start Boot Menu. See Chapter 3 (2 Description on System Utility).
Boot from network.
When no bootable device is connected, the following message is
Tips
displayed by terminating POST.
‑ No bootable devices ware detected
‑ Please attach a UEFI bootable device.
‑ System will automatically retry the UEFI Boot Order in x seconds.
Tell the indication displayed on display unit your sales representative.
Note
Alarm messages are useful information for maintenance.
Express5800/R120h-1M User's Guide
1. Turning on the Server
189
Advertisement
Table of Contents
