NEC EXP804 User Manual page 100

Chapter 2 Preparations
Part Part name Riser card name
number
Slot number
CPU connected
PCI standard
PCI slot performance *1
Bandwidth/lane *1
PCI board type *2
Slot size
Available size
Fibre Channel controller (1ch)
N8190-163
[PCI Express 3.0(x8)]
Fibre Channel controller (2ch)
N8190-164
[PCI Express 3.0(x8)]
Fibre Channel Controller (1ch)
N8190-165
[PCI Express 3.0(x8)]
Fibre Channel Controller (2ch)
N8190-166
[PCI Express 3.0(x8)]
Fibre Channel controller (1ch)
N8190-171
[PCI Express 3.0(x8)]
Fibre Channel controller (2ch)
N8190-172
[PCI Express 3.0(x8)]
GPU Computing Card
N8105-51
[PCI Express 3.0(x16)]
● Installed as standard
order of installation.
*1 The data transfer rate of PCI slot is calculated from a transfer band multiplied by the number of lanes.
<Ex.> x8 lanes = 64Gbps (one way)
*2 Shows a connector size. Cards having the number of plugs or lower can be connected.
<Ex.> x8 Plug→ x1card, x4card, or x8card can be installed. x16 card cannot be installed.

Refer to the technical guide for the detailed feature of each card.

We offer various types of riser cards. Depending on the types of riser cards, performance, form and
support PCI card of a slot may be different. Check the compatibilities of PCI cards referring to the list of
riser cards.

In case the performances are different between a PCI slot and a PCI board, the device operates on the
lower performance.
‑
FH: Full height
‑
FL: Full length
*3 Refer to the list of riser card slots for slot performance/ slot form of each slot.
*4 We offer various types of riser cards. Depending on the types of riser cards, performance, form and support
PCI card of a slot may be different. Check the compatibilities of PCI cards referring to the list of riser cards.
*5 When low profile types (N8103-192/193/194) are mounted on a type-a controller (AROC) which is installed
onto the RAID connector, the controller will be compatible with a three-quarter length. When mounted with
standard types (N8103-189/190/191), the controller will be compatible with a half-length.

For the detailed information on the function of each card, refer to the technical guide.

The brackets after the part names show the maximum performances of the cards themselves.

If performances are different between PCI slot and PCI card, the device operates by the lower
performance.

FH: full height, LP: low profile

3/4 L: 3/4 length, HL: half length
100
RAID FLOM 1st riser card *3
－ －
SLOT1 SLOT2
CPU1
PCIe3.0
x8 x8 x16 x8 x16
8Gb/s
－ －
x16 x8 x16
Dedic Dedic FH LP LP
ated ated
to to
3/4 L HL HL
RAID LOM
－ －
3
－ －
3
－ －
3
－ －
3
－ －
3
－ －
3
－ －
1
○ Installation Available － Installation Not Available The numbers stand for the
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
3rd riser card *3
SLOT3
CPU2
x16 x16
x16 x16
FH LP
3/4 L*5 HL
Can't mix with N8190-165/-166
1 2 2
Can't mix with N8190-165/-166
1 2 2
Can't mix with
1 2 2
N8190-163/-164/-171/-172
Can't mix with
1 2 2
N8190-163/-164/-171/-172
Can't mix with N8190-165/-166
1 2 2
Can't mix with N8190-165/-166
1 2 2
－ －
2 Up to 1
Remarks