Chapter 2 Preparations
1.21
1x 2.5-inch Drive Cage (SAS/SATA, Rear) N8154-92
Rear
Rear drive bay
Installing 1x 2.5-inch Drive Cage (SAS/SATA, Rear) N8154-92
Please prepare the following before installing the options.
Parts included in the option kit
T-10 and T-15 hexalobular drivers
2.5-inch drive or dummy tray
To install the components, follow these steps.
1.
See steps 1 to 6 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
Remove the primary riser card.
Note
In order to prevent the damage to electronic components, please start to install the
system after conducting the appropriate anti-static treatment. There is a possibility
of causing electrostatic discharge if appropriate grounding wire treatment is not
conducted.
Express5800/R120h-1M User's Guide
1. Installing Internal Optional Devices
Primary riser card
139