Table of Contents
Advertisement
Chapter 2 Preparations
Installing cable management arm N8143-125
A cable management arm can be installed to the unit for combining the multiple cables connected to the device.
Install the cable management arm in the following steps.
1)
Insert the two fixed parts of the cable management arm into the outer rail and the inner rail behind the rack.
It can also be mounted on the opposite side.
2)
Put multiple cables in the binding belt and secure them.
3)
Insert the fixed parts of the supplied cable management arm into the outer rail on the opposite side to attach
the cable arm.
Express5800/R120h-1M User's Guide
2. Installation and Connection
183
Advertisement
Table of Contents
