NEC Univerge SV8100 Features And Specifications Manual page 949

UNIVERGE SV8100
When Using a PGD(2)-U10 ADP:
Program
Program Name
Number
10-03-01 ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
11-06-01 ACI Extension Numbering
11-08-01 ACI Group Pilot Number – Dial
33-01-01 ACI Port Type Setup
Music on Hold
Description/Comments
If a PGD(2)-U10 ADP is used for
the external music source, the
module is automatically assigned
type 9 if the jumper straps in the
module were set prior to
connecting it to the system. If
another type was assigned,
disconnect the PGD(2)-U10 ADP
from the system, delete the type
setting, and, with the jumper
straps positioned correctly in the
PGD(2)-U10 ADP, reconnect the
module to the system. Refer to
the UNIVERGE SV8100 System
Hardware Manual for the jumper
strap settings.
Each ACI port must be assigned
an extension number. Assign the
extension numbers to ACI
software ports. Select a number
outside of the normal extension
number range.
Assign pilot numbers to ACI
groups. When a user dials the pilot
number, they reach an available
ACI software port in the group.
Set each ACI software port for
Input or Input/Output. Use input
ports for Music on Hold sources.
Use output ports for External
Paging/Ringer Control.
Assigned Data
1
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)

9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
ACI Ports: 1~96
(default not assigned)

Up to eight digits
ACI Groups: 1~16

(default not assigned)
ACI Ports: 1~96
ACI Types:
0 = None

1 = MOH/BGM (Input)
2 = External Audio
Port (Input/Output
(default = 2)
Issue 5.0
Level
2 3
2 - 923