NEC Univerge SV8100 Features And Specifications Manual page 738

Issue 5.0
Program
Program Name
Number
10-19-01 VoIP DSP Resource Selection
10-26-01 IP System Operation Setup –
Peer to Peer Mode
10-26-03 IP System Operation Setup – SIP
Peer to Peer Mode
84-06-01 PVA Data Setting – RTP Port
Number
84-06-02 PVA Data Setting – RTCP Port
Number
84-06-04 PVA Data Setting – Fract Lost
Threshold
84-06-05 PVA Data Setting – Packets Lost
Threshold
84-06-07 PVA Data Setting – Jitter
Threshold
84-06-09 PVA Data Setting – Delay LSR
Threshold
2 - 712
Description/Comments
Select type of IPLA DSP
Resource. This program setting
has no affect on the terminal/trunk
port assignment or usage.
Enable/Disable the Peer to Peer
feature for SIP IP stations.
Enable/Disable the Peer to Peer
feature for SIP IP stations.
Define the Media Gateway starting
RTP Port Number.
Define the Media Gateway
Starting RTCP Port Number. The
RTCP Port Number is the RTP
port number + 1.
Define the fractional lost threshold
– this data is sent to the
UNIVERGE SV8100 CD-CP00-US
when the value exceeds the
defined value.
Define the packet lost threshold –
this data is sent to the UNIVERGE
SV8100 CD-CP00-US when the
value exceeds the defined value.
Define the Jitter Threshold – this
data is sent to the UNIVERGE
SV8100 CD-CP00-US when the
value exceeds the defined value.
Define the Delay threshold – this
data is sent to the UNIVERGE
SV8100 CD-CP00-US when the
value exceeds the defined value.
UNIVERGE SV8100
Assigned Data
1
0 = Common use for
both IP extensions and
trunks
1 = IP Extension
2 = SIP Trunk

3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
0 = Off
1 = On
(default = 1)
0 = Off
1 = On
(default = 1)
0~65535
(default = 10020)
RTP Port Number + 1
(default = 10021)
0~100%
(default = 0)
0~16777215
(default = 0)
0~4294967295
(seconds)
(default = 0)
0~4294967295
(default = 0)
IP Single Line Telephone (SIP)
Level
2 3







