NEC Univerge SV8100 Features And Specifications Manual page 259

UNIVERGE SV8100
Program
Program Name
Number
15-07-01 Programmable Function Keys
20-02-08 System Options for Multiline
Telephones – LCD Display
Holding Time
20-06-01 Class of Service for Extensions
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
Caller ID
Description/Comments
Assign functions to multiline
terminal line keys.
Determine the time a user display
shows Caller ID for a second
incoming call.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On a user Class of
Service from automatically
blocking outgoing Caller ID
information when a call is placed.
If block is enabled, the system
automatically inserts the Caller ID
block code 67 (defined in
Program 14-01-21) before the
user dialed digits (this requires
Program 14-02-10 to be enabled).
If block is disabled, the system
outdials the call just as it was
dialed by the user.
Turns Off or On the Caller ID
display at an extension.
Determine whether or not the
CHECK LIST message is
displayed to indicate a missed call.
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook signals.
Assigned Data
1
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0~64800 (seconds)
(default = 5 seconds)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 5.0
Level
2 3






2 - 233