NEC Univerge SV8100 Features And Specifications Manual page 575

UNIVERGE SV8100
Program
Program Name
Number
21-02-01 Trunk Group Routing for
Extensions
Calling Party Number Presentation
Program
Program Name
Number
10-03-05 ETU Setup (PRTA Pkg Setup) –
CLIP Information
15-01-04 Basic Extension Data Setup –
ISDN Caller ID
20-06-01 Class of Service for Extensions
20-08-13 Class of Service Options
(Outgoing Call Service) – ISDN
CLIP
E911 Compatibility
Description/Comments
Assign the routes set in Program
14-06 to extensions. This program
and Program 14-06 are the
minimum required if E911 must
seize a line to dial.
Description/Comments
Based on this setting, the system
includes a Presentation Allowed
(1) or Presentation Restricted (0)
in the Setup message to allow/
deny the Calling Party Number.
Program 15-01-04 must also be
set to 1 if this option is enabled.
If both Program 15-01-04 and
Program 10-03-05 are Enabled,
the system includes Caller ID in
the Setup message as
Presentation Allowed. If these
options are Disabled, it is
Presentation Restricted.
Assign a Class of Service (1~15)
to an extension.
Determine if the ISDN calling line
identity presentation and
screening indicators should be
allowed.
Assigned Data
1
1~100 (Trunk Groups)
0~100

(0 = No Setting)
(default = 1)
Assigned Data
1
0 = Disable
1 = Enable
(default = 1)
0 = Disable
1 = Enable
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On

(default = 0)
Issue 5.0
Level
2 3
Level
2 3


2 - 549