NEC Univerge SV8100 Features And Specifications Manual page 574

Issue 5.0
Program
Program Name
Number
14-05-01 Trunk Group – Trunk Group
Number
14-06-01 Trunk Group Routing – Priority
Order Number
20-06-01 Class of Service for Extensions
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
21-01-12 System Options for Outgoing
Calls – Dial E911 Routing
Without Trunk Access
21-01-13 System Options for Outgoing
Calls – Alarm Ring Timer (E911)
2 - 548
Description/Comments
Assign the outbound trunks you
want to use for E911 service to the
same Trunk Group.
Set the priority order number 1~4.
Assign a Class of Service to an
extension (1~15).
Turn Off or On an extension ability
to display the name and number of
the extension that dialed 911.
If Enabled (1), an extension user
can dial 911 without first dialing a
trunk access code or pressing a
line key. If Disabled (0), an
extension user must dial a trunk
access code (e.g., 9) or press a
line key before dialing 911. If
#
enabled, dialing 9+911 still dials
out.
Set the duration of the E911 Alarm
Ring Time. If set to 0, the E911
Alarm does not ring.
UNIVERGE SV8100
Assigned Data
1
Trunk Group Number:
0~100 Priority Number:
1~200 (default = Trunk
Group 1, with priority in
ascending order.)
0 = Not Specify
1~100 : (Trunk Group
Number)
1001~1100 : (1000 +
Route Table Number)
Default:
Route 1, Order

Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified).
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Trunk Access Code
Required
1 = Trunk Access Code
Not Required
(default = 1)
0~64800 (seconds)
(default = 0)
E911 Compatibility
Level
2 3




