NEC Univerge SV8100 Features And Specifications Manual page 759

UNIVERGE SV8100
Program
Program Name
Number
84-13-11 SIP Trunk CODEC Information
Basic Setup – G.729 Jitter Buffer
(max)
84-13-17 SIP Trunk CODEC Information
Basic Setup – Jitter Buffer Mode
84-13-18 SIP Trunk CODEC Information
Basic Setup – VAD Threshold
84-13-26 SIP Trunk CODEC Information
Basic Setup – TX Gain
84-13-27 SIP Trunk CODEC Information
Basic Setup – RX Gain
84-13-28 SIP Trunk CODEC Information
Basic Setup – Audio Capability
Priority
84-13-31 SIP Trunk CODEC Information
Basic Setup – DTMF Payload
Number
IP Trunk – (SIP) Session Initiation Protocol
Description/Comments
Set the maximum G.729 Jitter
Buffer.
Set the Jitter Buffer Mode.
Set the VAD (Voice Activity
Detection) threshold.
Set the transmit gain.
Set the receive gain.
Define the CODEC Priority.
Define the DTMF Payload
Number.
Assigned Data
1
0~270ms

(default = 80)
1 = Fixed
2 = Adaptive during
silence

3 = Adaptive
Immediately
(default = 3)
0~30 = -19dB~+10dB
1 =-19dB (-49dBm)
:
2 =0dB (-30dBm)

:
29 =9dBm (-21dBm)
30 =0dBm (-20dBm)
(default = 20)
0~40
(-20dBm ~ +20dBm)
0 = -20dBm
1 = -19 dBm
:

20 = 0dBm
:
39 = 19 dBm
40 = 20dBm
(default = 20)
0~40
(-20dBm ~ +20dBm)
0 = -20dBm
1 = -19 dBm
:

20 = 0dBm
:
39 = 19 dBm
40 = 20dBm
(default = 20)
0 = G.711_PT
1 = G.723_PT
2 = G.729_PT

3 = G.722_PT
4 = G.726_PT
5 = Not Used
(default = 0)
96~127

(default = 110)
Issue 5.0
Level
2 3
2 - 733