NEC Univerge SV8100 Features And Specifications Manual page 383

UNIVERGE SV8100
Switching Between the Desktop Multiline Telephone and the Cordless DECT Terminals Using the
Base Unit:
When the Cordless DECT Terminals is associated with a multiline telephone the following is applicable:
Switching between the cordless mode and desk mode must be done while both telephones are

idle.
A call in progress cannot be switched between the Cordless DECT Terminals and the associated

multiline telephone.
Switching held calls between the Cordless DECT Terminals and the associated multiline telephone

is not recommended because line key LED indications are not provided.
Switching from multiline telephone and D
1. Press the Cordless button on the base unit.
term
To switch from D
1. Press the DESK button on the base unit.
For additional Operating Procedures, refer to the Cordless DECT Terminals (DTL-8R-1) Owner's Guide.
Cordless DECT Terminals
Cordless Lite II Telephone to multiline telephone:
term
Cordless Lite Telephone:
Issue 5.0
2 - 357