NEC Univerge SV8100 Features And Specifications Manual page 743

UNIVERGE SV8100
Program
Program Name
Number
84-20-05 SIP Extension Basic Information
Setup – Expire Value of Invite
84-26-01 IPL Basic Setup – IP Address
84-26-02 IPL Basic Setup – RTP Port
Number
84-26-03 IPL Basic Setup – RTCP Port
Number (RTP Port Number + 1)
IP Phone Configuration:
Program
Program Name
Number
15-01-01 Basic Extension Data Setup –
Extension Name
IP Single Line Telephone (SIP)
Description/Comments
Define the time out response
value for SIP invite.
Assign the IP address for each
DSP on the IPLA.
Assign the RTP port number to be
used for each DSP on the IPLA.
 Only even numbered ports
are supported.
Define the TCP port number for
RTCP to use for each DSP.
Description/Comments
Define the extension/virtual
extension name.
Assigned Data
1
0~256 (seconds)
(default = 180)
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:

Slot 4 = 172.16.0.44
VoIP GW Number 1~8
172.16.0.20 ~
172.16.16.0.27
0~65534
Defaults:
VoIP GW1 = 10020
VoIP GW2 = 10052
VoIP GW3 = 10084
VoIP GW4 = 10116
VoIP GW5 = 10148
VoIP GW6 = 10180
VoIP GW7 = 10212
VoIP GW8 = 10244
0~65534
Defaults:
VoIP GW1 = 10021
VoIP GW2 = 10053
VoIP GW3 = 10085
VoIP GW4 = 10117
VoIP GW5 = 10149
VoIP GW6 = 10181
VoIP GW7 = 10213
VoIP GW8 = 10245
Assigned Data
1
Up to 12 characters
Default:

STA 101 = Ext 101
STA 102 = Ext 102,
etc.
Issue 5.0
Level
2 3



Level
2 3
2 - 717