NEC Univerge SV8100 Features And Specifications Manual page 744

Issue 5.0
Program
Program Name
Number
15-05-02 IP Telephone Terminal Basic
Data Setup – IP Phone Fixed Port
Assignment
15-05-07 IP Telephone Terminal Basic
Data Setup – Using IP Address
15-05-15 IP Telephone Terminal Basic
Data Setup – CODEC Type
15-05-16 IP Telephone Terminal Basic
Data Setup – Authentication
Password
15-05-17 IP Telephone Terminal Basic
Data Setup – Calling Party
Display Info
2 - 718
Description/Comments
MAC Address of registered MLT
SIP phone is stored and/or can
input the MAC address of an MLT
SIP phone so when it comes
online it is provided with the
extension which the MAC address
matches.
Review the registered IP Phones
IP Address [Informational Only].
Set the registered IP Phone
Codec type – Reference Program
term
84-11 D IP Codec Basic
Information.
Assign the authentication
password for SIP single line
telephones.
Define the part of the Invite
message the calling party
information is taken from. There
are four choices:
Nickname: Displays the nickname
programmed in 15-05-04.
Display Name: Some SIP phones
have a Field called Display Name.
If configured, in the SIP phone,
this displays on a call from that
station.
User Part: Some SIP phones
have a field called User Part. If
configured in the SIP phone, this
displays on a call from that station.
Extension: Display shows
extension of the SIP phone.
UNIVERGE SV8100
Assigned Data
1
MAC address
00-00-00-00-00-00 to
FF-FF-FF-FF-FF-FF

(default =
00-00-00-00-00-00)
0.0.0.0 ~

255.255.255.255
(default = 0.0.0.0)
1-Type 1
2-Type 2
3-Type 3

4-Type 4
5-Type 5
(default = 1)
Up to 24 characters

(default not assigned)
0 = Nickname
1 = Display Name
2 = User Part
3 = Extension
(default = 0)

IP Single Line Telephone (SIP)
Level
2 3