NEC Univerge SV8100 Features And Specifications Manual page 303

UNIVERGE SV8100
Program
Program Name
Number
20-08-19 Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
20-08-20 Class of Service Options
(Outgoing Call Service) – Hot
Key Pad
20-08-21 Class of Service Options
(Outgoing Call Service) –
Automatic Trunk Seizing by
Pressing Speaker Key
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
20-09-04 Class of Service Options
(Incoming Call Service) –
Notification for Incoming Call
List Existence
Class of Service
Description/Comments
Turn Off or On an extension user
ability to activate hotline or
ringdown when pressing the
Speaker key.
Turn Off or On an extension user
ability to make a call by just dialing
the number without first going
off-hook.
Enable/Disable the ability to
access trunks when going off-hook
by pressing the speaker key for
each Class of Service.
Enable/Disable the ability to make
voice over to a busy virtual
extension for each Class of
Service.
Turn Off or On the extension
ability to receive a second call
from a DID, DISA, DIL, or tie line
caller.
With this option set to 1, the

destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a line or Call
Appearance (CAP) Keys
available for the second call
and a previous call is ringing
the extension but has not
been answered, the second
caller hears busy regardless
of this program setting.
Turn Off or On the Caller ID
display at an extension.
Define whether or not an
extension displays the Caller
Sub-Address.
Determine whether or not the
CHECK LIST message is
displayed to indicate a missed call.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 5.0
Level
2 3








2 - 277