Ipk/Ipk Ii Migration - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
This feature added with Version 2500 (V2.50).
DTU/DTP terminal support is available with Version 2.51 or higher.
Description
The IPK/IPK II Migration package allows the user of an existing NEC IPK/IPK II platform to utilize the
enhanced capabilities of the SV8100.
Conditions
IPK/IPK II Migration feature available with Version 2500 or higher.

DTU/DTP terminal support is available with Version 2.51 or higher.

The IPK/IPK II Migration package (MGN-U10 ETU) is available only with the SV8100.

A single SV8100 chassis is supported in an IPK/IPK II Migration system.

The MGN-U10 ETU is only supported in the B64-U10, U20, and U30 KSU's.

When migrating from an IPK or IPK II system, the system database cannot be converted

and must be rebuilt.
The MGN-U10 ETU provides a connection between the IPK/IPK II and the UNIVERGE

SV8100 system. The MGN-U10 ETU is installed in the CPU/Ext slot of the IPK/IPK II KSU.
Refer to the UNIVERGE SV8100/SV8300 System Hardware Manual for a complete list of

supported packages.
The IPK/IPK II system is limited to 18 slots total.

MEGACO telephone is not supported.

An IPK/IPK II system can support the migration card, provided the cards and terminals are

listed below as being supported. It may be necessary to upgrade firmware as noted.
DT300 series terminals are not supported in a migration system unless connected to a

DLCA blade in the controlling SV8100 chassis.
When adding or removing padding for trunks, use Program 14-01 for all trunks except the

PRI trunks in a Migration cabinet. Use Program 81-12 to add or remove padding for PRI
trunks in a migration cabinet.

IPK/IPK II Migration

IPK/IPK II Migration
Issue 5.0
2 - 749