Auto Detect Setting - JVC LST0728-001C Instructions Manual

Applications
Main Menu List (continued)

Auto Detect Setting

This section enables you to assign an IP address to each camera and configure various auto detect settings.
For procedures on using the Auto Detect feature, refer to [Auto Detect Settings] (A Page 113).
A
B
C
D
Item
A
IP Lease
80
Preset Values
Enable For configuring the function to assign IP addresses to each
network camera.
Disable
Memo :
● In order to assign an IP address of the network camera
using the IP Lease feature, you need to enable the DHCP of
the network camera. For procedures to enable the DHCP of
the network camera, refer to the [INSTRUCRTIONS] of the
network camera.
● If a network uses a multiple number of this product, enable
[IP Lease] only for one unit. Select ADisableB if a DHCP
server is operating on the same network. When the [IP
Lease] is enabled for two or more devices at the same time,
the IP address may change to a static address, and cause
malfunction of the cameras.
T VR-N900U only
Description
E
F
G
Reference
Page
A Page 113