Toshiba e-STUDIO5540C Management Manual page 22

1 SETTING ITEMS (USER)
3
Specify the following items as you require.
For e-STUDIO456 Series
For e-STUDIO306LP
ORIGINAL MODE — Press the desired mode button.
OMIT BLANK PAGE ADJUSTMENT — Use
detect blank pages from the scanned data in a copy job. The higher the level is, the more likely the equipment is to
detect blank pages. For more information about the omit blank page function, refer to the Copying Guide
"Chapter 4: EDITING FUNCTIONS".
When you are using the e-STUDIO456 Series or e-STUDIO306LP, press [OK] to save the settings.
For e-STUDIO856 Series
ORIGINAL MODE — Press the desired mode button.
INSERTER/INVERT BACK COVER — Press [ON] if you want to invert the back cover that is fed from the Inserter
Unit. This option is useful when you want to output the front cover as the face side will be front side, and output the
back cover sheet as the face side will be the back side.
OMIT BLANK PAGE ADJUSTMENT — Use
detect blank pages from the scanned data in a copy job. The higher the level is, the more likely the equipment is to
20 Setting Copy Functions
and to select the appropriate sensitivity from 7 levels to
and to select the appropriate sensitivity from 7 levels to