IEEE 802.1X Authentication Setting
This menu allows you to make settings for IEEE 802.1X authentication that will apply to wired networks.
This equipment supports the following authentication methods:
EAP-MD5
EAP-MSCHAPv2
EAP-TLS
PEAP
The following protocol is available for inner authentication:
- EAP-MSCHAPv2
EAP-TTLS
The following protocols are available for inner authentication:
- PAP
- CHAP
- EAP-MSCHAPv2
- EAP-MD5
The following certificates are required for each authentication method using TopAccess to enable IEEE 802.1X
authentication:
Authentication Method
EAP-MD5
EAP-MSCHAPv2
EAP-TLS
PEAP
EAP-TTLS
For instructions on how to install certificates, refer to the TopAccess Guide "Chapter 8: [Administration] Tab
Page".
The settings for IEEE 802.1X authentication depend on the authentication method you select.
Setting IEEE802.1X authentication
1
Press [802.1X SETTINGS] on the ADMIN menu (1/2).
The WIRED 802.1X SETTINGS screen is displayed.
To display the ADMIN menu, see the following page:
P.75 "Entering Admin Menu"
Inner Authentication Method
—
—
—
EAP-MSCHAPv2
PAP
CHAP
EAP-MD5
EAP-MSCHAPv2
2 SETTING ITEMS (ADMIN)
CA Certificate
User Certificate
—
—
Required
Required
Required
Required
Required
Required
Required
IEEE 802.1X Authentication Setting
—
—
—
—
—
—
—
201