Setting Up Ldap Authentication - Toshiba GL-1010 Administrator's Manual

Printing Software Patch Information
To print detailed information regarding a software patch:
1 Log in as an administrator.
2 Click the
3 Click the
4 Click the
5 Select the patch you want to print from the list on the Patch
Management page.
6 Click the

Setting Up LDAP Authentication

LDAP Authentication authenticates logins through an LDAP server,
usually the same server that provides LDAP services for e-mail address
lookup and similar functions. The local administrator login is
authenticated on the controller itself, so that local admin functions can be
accessed. Other administrator users authenticated on the LDAP server do
not necessarily have the same rights as the local administrator. The local
administrator still accesses the admin functions through TopAccess.
To set up LDAP authentication:
1 Log in as an administrator using the default admin account for the
server you are setting up.
2 Click the
3 Click the
4 Click the down arrow on the
select
5 Select either the
6 Enter the
standard IP address format. This is a required field.
7 Enter the LDAP server
a required field.
8 Optionally, check the
GL-10x0 Administrator's Guide
Administration
subtab.
Maintenance
Patch Management
Print Patch Info
Administration
subtab. The Security page opens.
Security
.
Enable
or the
V1
provides no additional features beyond using the LDAP server
V1
for verification.
requires all users to login to use TopAccess on that controller
V3
and also requires users to log in to use the Printer/Network
functions from the copier console. The login that they will use is
their login on the LDAP server.
Server IP Address
tab.
link. The Patch Management page opens.
button.
tab.
LDAP Authentication
radio button.
V3
of the LDAP server. This value must use
. The default value is port
Port Number
checkbox to use SSL security.
SSL
pull-down list and
is the default setting.
V3
389
. This is
283