Setting The Password - Toshiba GL-1010 Administrator's Manual

4 Press the Login button. The controller sends the data to the LDAP
server for authentication. If you have entered the data correctly and
your account exists on the LDAP server, you are logged in to the
controller. If you enter the administrator account information, you
are logged in as the local controller administrator.

Setting the Password

The first time you log on, you should change the password immediately to
prevent unauthorized access.
1 In the main Admin menu press
Change Admin Password screen.
2 Press
3 Press
4 Press
ensure you typed it correctly.
5 Press
If the password in
NEW PASSWORD
changed. Type and confirm the password again.
If the values match, a message informs you the password was
changed successfully. TopAccess requires you to enter this code each
time you access the administration functions.
Note: If you forget your password, contact your TOSHIBA authorized
dealer.
GL-10x0 Administrator's Guide
Change Admin Password Screen
to select it and type the existing password.
OLD PASSWORD
to select it and type a new five-digit password.
NEW PASSWORD
CONFIRM NEW PASSWORD
.
OK
CONFIRM NEW PASSWORD
, a message informs you the access code was not
CHANGE PASSWORD
and type the new five-digit code again to
does not match the value in
to display the
25