Modifying Protocol Settings Locally - Toshiba GL-1010 Administrator's Manual

Modifying Protocol Settings Locally

The controller default protocol settings ensure quick and easy
installation. However, you may want to customize the settings for optimal
operation in your network environment.
Note: For a complete list of the default controller Network
Configuration settings, refer to
Network Settings
For example, the Auto Sense configuration setting for the IPX protocol is
enabled by default. With Auto Sense enabled, the controller automatically
determines the appropriate IPX frame type and issues SAP packets over
the network. This default setting makes device discovery immediate and
automatic. However, it generates IPX packets on any network, even one
that only runs TCP/IP.
You can change the default network configuration settings from the LCD
touch screen as described here. Alternatively, you can use TopAccess to
adjust network settings. For details, refer to
Settings Remotely
Accessing Network Protocol Settings
1 Press
2 Press the
3 Type your five-digit password.
4 Press
26
on page 8.
on page 69.
.
PRINTER/NETWORK
tab.
ADMIN
. The Admin menu opens.
OK
Admin Menu Screen
Analyze the Default Controller
Modifying Controller
GL-10x0 Administrator's Guide