Toshiba GL-1010 Administrator's Manual page 238

D C
EPARTMENT ODE
These buttons send the
to the printer. The default setting is
DIN (D ID N
OCUMENT
The Document ID Number (DIN) is set using the DIN feature set in the
Printer Features dialog box only if the Print Mode is set to
under the Finishing Options feature set.
3 Select each of the five list boxes on the DIN feature set, to create a
five-digit number.
The default DIN is
lists includes a list of numbers from 0 to 9. The default DIN setting for
each digit is
4 If you are finished, click
DC (D C
EPARTMENT
The Department Code can be used for job accounting. When this option is
enabled the access code value is sent to the printer. The access code is a
value between
Set the Department Code using the DC feature set under printer features
only if the Department Code (DC) On button is checked under the
Finishing Options feature set.
5 Select each of the five list boxes on the DC feature set to create a five-
digit number.
216
(DC) O
N
)
UMBER
CUPS: Private Print DIN Selection
.
0
)
ODE
and
0 99999
CUPS: Department Code Selection
defined under the DIN feature set
Department Code
.
Off
. Each of the Private Print Document ID (DIN)
00000
.
Continue
.
Private Print
GL-10x0 Administrator's Guide