Toshiba GL-1010 Administrator's Manual page 253

Windows 2000
Windows XP SP2
At least 60 MB free disk space on the destination drive; 120 MB for
optimal performance.
To ensure successful implementation:
Close all Windows applications before installing the new software.
If an old version of TOSHIBA client software is installed, right-click
the document monitoring application icon in the system tray, then
choose
If your workstation had a previous version of TOSHIBA software
installed, the setup program detects it and opens the Client Setup
Maintenance Program. Click
components.
You can also use the Windows Add/Remove Programs option,
accessible from the Windows Control Panel, to delete the old software.
Client Setup
1 Insert the e-STUDIO Client CD-ROM into the workstation CD-ROM
drive. If
automatically.
Otherwise, choose
Setup.exe file on the CD-ROM. Click
program.
2 Follow the Setup Wizard through the installation steps. When
prompted:
GL-10x0 Administrator's Guide
Microsoft Windows 2000 Service Pack 1 or higher
Novell Client v4.9 SP1a or higher with Z.E.N works Starter Pack
is required to run IPX-based SNMP access and Novell printing.
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
Novell Client v4.9 SP1a or higher is required to run IPX-based
SNMP access and Novell printing.
The Microsoft Client for NetWare can replace the Novell Client
except for NDPS printers.
from the short-cut menu.
Exit
is enabled, the InstallShield Setup Wizard starts
Auto-Run
Run
Enter a destination directory or accept the default location.
Select the drivers and fonts to install.
to delete all previously installed
Remove
from the Start menu and then locate the
OK
to launch the setup
231