Setting Up Network Print Services - Toshiba GL-1010 Administrator's Manual

14 You can remove MAC addresses from this exclusion list by selecting
the MAC address from the list and clicking the
15 Click
Alternatively, you can click
values or click

Setting Up Network Print Services

The following topics explain how to configure network printing services.
Configuring Bluetooth (Option)
If you intend to use the bluetooth wireless networking option, you must
enable and configure bluetooth network settings.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the Bluetooth Printing area, click the
5 Select
6 In the
7 In the
to allow the Bluetooth device to be discovered.
8 In the
enable the print security feature.
9 In the
10 In the
No
11 Click
Configuring Novell Printing
If you intend to print over a Novell network, you must enable and
configure Novell print services.
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the Novell Printing area, click the
Administrator's Guide
GL-10x0
to save the settings for the firewall.
Save
Restore Defaults
Print Services
Enable Disable
or
Bluetooth Name
area, click the drop-down list and select
Allow Discovery
area, click the drop-down list and select
Print Security
Create a PIN Number
Use Data Encryption
to enable the data encryption security feature.
.
Save
Print Services
to reset the settings to their previous
Reset
to rest all settings to their default values.
Setup
link. The Print Services page opens.
.
field, enter a name for the Bluetooth device.
field, enter a number of up to 8 digits long.
area, click the drop-down list and select
Setup
link. The Print Services page opens.
Service
button.
Delete
subtab.
drop-down list.
Service
subtab.
drop-down list.
or
Yes No
or to
Yes No
or
Yes
125