Toshiba GL-1010 Administrator's Manual page 170

6 Click the
7 Select the appropriate setting.
8 Click
Configuring TCP/IP Settings
1 Log in as an administrator.
2 On the Administration tab, click the
3 Click the
4 In the TCP/IP area, click the
5 Select either
Note: If DHCP is selected, the
are not displayed.
6 Enter the
7 Enter the address of the
8 Enter the address of a
9 Continue with the instructions in
page 149.
Configuring Wireless DDNS
Dynamic DNS services allow a DHCP server to set the device Host Name
at the same time that it sets the IP address, gateway, and other
parameters. For those sites with large numbers of printers, DDNS allows
new printers to be configured automatically.
To configure DDNS:
1 Log in as an administrator.
2 On the Administration tab, click the
opens.
3 Click the
4 In the DDNS area, click the down arrow beside the
Dynamically
5 Select
6 Enter the host name of the DNS server in the
is disabled if DDNS is disabled. The default value for this field is the
MAC address of the controller.
148
drop-down list.
Frame Type
.
Save
Wireless Network
or
Static IP
,
IP Address Subnet Mask
Secondary DNS Server
Wireless Network
pull-down list box.
to enable DDNS or
Enable
Setup
link. The Wireless Network page opens.
IP Address Resolution
.
DHCP
,
IP Address
, and
Gateway Address
Primary DNS Server
Configuring SMB Settings
Setup
link. The Wireless Network page opens.
to disable DDNS.
Disable
GL-10x0
subtab.
drop-down list.
and
Subnet Mask Gateway
if appropriate.
.
.
subtab. The Setup page
Update DNS
field. This field
Host Name
Administrator's Guide
fields
on