Toshiba GL-1010 Administrator's Manual page 86

Displaying Print and Copy Totals
Regardless of whether the department code feature is enabled, you can
click the Counters tab in TopAccess to display the print and copy totals.
Department Code Functionality
There are three possible cases:
The department code feature is disabled
The department code feature is enabled, but enforcement is not
Both the department code feature and the enforcement option are
enabled.
Department Code Feature is Disabled
In this case:
The controller ignores any department codes submitted with a print
job and does not prompt you to enter the code. This applies to all
jobs, including raw and non-Windows operating system jobs.
In the printer drivers, the
disabled.
In TopAccess, the
Only the Department Code Feature is Enabled
If the department code feature is enabled but enforcement is disabled:
In the printer drivers, the controller enables the
and
If you enter a department code, the controller reports the code to the
copier and includes it in the print job, but does not check the validity
of the code.
Similarly, if a Macintosh, Unix, Linux, or raw print job includes a
department code, the code is not checked.
In Top Access, the
V D
ALID EPARTMENT
If the department code is valid, the system increments the appropriate
department counter.
If you enter a valid department code other than the master department
code, TopAccess displays the counter totals for the department. You
cannot change any counters.
64
Enforce Department Codes
fields.
Edit
C
ODES
Department Code
Enforce Department Codes
label and field are
Edit
option is unavailable.
Department Code
option is available.
GL-10x0 Administrator's Guide
label