Placing The Controller Offline; Enabling Secure Erase - Toshiba GL-1010 Administrator's Manual

Placing the Controller Offline

You can force the controller to remain offline for extended periods of time.
The controller will remain offline until you return it to service. While the
controller is offline, the walk-up functions of the digital copier will still
function normally.
1 Log in as an administrator.
2 Click the
3 Click the
4 Under Options, click the down arrow beside the
list and select
5 Click
previously saved values.
6 To return the controller to online service, return to the
Administration>Device subtab and select
pull-down list.
7 Click
previously saved values.

Enabling Secure Erase

The secure erase feature overwrites erased and deleted information to
prevent data recovery of secure information. This feature provides options
regarding the method with which the data is overwritten and also the
pattern of data overwriting.
To enable or disable secure erase:
1 Log in as an administrator.
2 Click the Administration tab.
3 Click the Device subtab. The Device page opens.
4 Click the
5 Under Options, click the checkbox to the left of the
label to enable or disable the Secure Erase function.
6 Click the down arrow on the
list.
7 Select the option you want. The default is
options include
8 Click the down arrow on the
list.
276
tab.
Administration
subtab. The Device page opens.
Device
. The controller will go offline.
Enable
to save the change or
Save
to save the change or
Save
link.
General
Use 1x overwrite
to return the values to their
Reset
Disable
to return the values to their
Reset
pull-down list to open the
Over Write Method
Use DoD Standard
and
Use 7x overwrite
pull-down list to open the
Over Write Pattern
GL-10x0 Administrator's Guide
pull-down
Offline Fixed
from the
Offline Fixed
Enable Secure Erase
, other
.