Toshiba GL-1010 Administrator's Manual page 340

LCD Message
Latch the developer
unit
Misfeed in finisher
(Press HELP)
Missfeed in copier
(Press HELP)
Missfeed in Inserter
(Press HELP)
Paper misfeed in
bypass
Please Dispose of Hole
Punch Dust
Remove paper from
saddle stitch unit
Service recommended
for IQC
Set key copy counter
Set staple cartridge
Set staple cartridge of
saddle stitch unit
Time for periodic
maintenance
USE GENUINE
TOSHIBA TONER
WAIT
Wait adding toner
318
Message Log Error Messages (Continued)
TopAccess Message
Latch the developer unit
Misfeed in finisher
Missfeed in copier
--
Paper misfeed in bypass
Dispose of hole punch dust
Remove paper from saddle
stitch unit
Service recommended for IQC Service recommended for IQC.
Set key copy counter
Set staple cartridge
Set staple cartridge of saddle
stitch unit
Time for periodic maintenance Time for periodic maintenance.
Use genuine TOSHIBA Toner
Wait - Self maintenance
Wait - Adding toner
Corrective Action
Latch the developer unit.
Clear the misfeed in the finishing
unit. Press the copier HELP button
for more information.
Clear the missfeed. Press the
copier HELP button for more
information.
Clear the missfeed in the inserter.
Press the copier HELP button for
more information.
Clear the missfeed in the bypass
tray.
Dispose of the hole punch dust.
Remove paper from the saddle
stitch unit.
Contact your TOSHIBA authorized
dealer for support.
Set key copy counter.
Set the staple cartridge.
Set the staple cartridge of the
saddle stitch unit.
Contact your TOSHIBA authorized
dealer for support.
Check and adjust the toner bottle.
Please wait - Self maintenance in
progress.
Wait - Adding toner.
GL-10x0 Administrator's Guide