Toshiba GL-1010 Administrator's Manual page 49

5 Press
6 To access specific protocol settings, press the applicable soft key.
For more details, refer to the following pages in this manual:
After you finish updating network or device settings, you must apply the
changes you made during the session. This process updates and reboots
the controller so the modifications can take effect. If you do not apply
your changes, they are lost when you press
Note: Check the configuration page that automatically prints upon
start up to confirm that the changes were applied.
GL-10x0 Administrator's Guide
NETWORK SETTING
Network Setting Screen
TCP/IP server (see
page 28)
WINS server (see
page 29)
IPX/SPX (see Configuring IPX/SPX Protocol Settings
page 29)
Ethernet speed (see
on page 31) only for Ethernet
AppleTalk (see Configuring AppleTalk Protocol Settings
page 31) only for Ethernet
. The Network Setting screen opens.
Configuring TCP/IP Protocol Settings
Setting Up WINS and DNS Servers
Configuring the Ethernet Speed Settings
or the copier times out.
COPY
on
on
on
on
27