Toshiba e-STUDIO5540C Management Manual page 99

2.SETTING ITEMS (ADMIN)
Setting the print calibration
1
Press the following buttons as required.
For the e-STUDIO4540C Series
Press [PRINT].
For the e-STUDIO6550C Series
Press either of the following buttons.
[600dpi PRINT]
Press this button to calibrate for the 600 dpi print jobs.
[1200dpi PRINT]
Press this button to calibrate for the 1200 dpi print jobs.
2
Press [DEFAULT] to set the default calibration setting, or [CALIBRATION] to adjust the
calibration setting.
When you press [DEFAULT], the system maintains the default calibration setting and returns to the previous
screen.
When you press [CALIBRATION], a chart is printed out and the calibration guide illustration is displayed on the
touch panel.
Proceed to the next step.
2 SETTING ITEMS (ADMIN)
Setting General Functions 97