Outside Line Group - Panasonic KX-TD816 Features Manual

General Features

Outside Line Group

Description
Outside lines can be grouped into up to eight outside line groups (for example, WATS, DDD,
FX services, etc.). This allows extensions to call outside parties without designating a specific
outside line, since an outside line is automatically selected from the designated outside line
group. All outside lines belonging to an outside line group follow the assignment determined
for that outside line group. A list of assignments for each outside line group is shown as
follows:
• The destination of Intercept Routing
• Disconnect Time
• Flash Time
• Host PBX Access Code
• Pause Time (used in Speed Dialing and Flash)
Conditions
• Each outside line can only belong to one outside line group.
• Outside lines in an outside line group are selected uniformly if all lines belong to the same
system.
• If System Connection
systems. In this case, an outside line is first selected from the user's system. If all lines in
the user's system are in use, a line in the other system is selected.
Programming Guide References
• [100] Flexible Numbering
• [401] Outside Line Group Assignment
• [409-410] Intercept Extension —— Day / Night
• [411] Host PBX Access Codes
• [412] Pause Time
• [413] Flash Time
• [414] Disconnect Time
Features Guide References
None
User Manual References
Not applicable.
Available for the KX-TD1232 only.
*1
196
is established, an outside line group can include outside lines in both
*1
Features Guide