Panasonic KX-TD816 Features Manual page 39

their features (External Feature Access).
Function: Used to perform the displayed function / operation.
FWD / DND (Call Forwarding / Do Not Disturb): Used to program Call Forwarding, set Do
Not Disturb.
HOLD: Used to place a call on hold.
INTERCOM: Used to make or receive intercom calls.
Jog Dial: Used to adjust the ringer, speaker, handset and headset volume and the display
contrast. With the KX-T7431, KX-T7433 and KX-T7436, it can also be used to select data
from the Call Directory and the System Feature Access Menu on the display.
MESSAGE: Used to send a message or display current message.
MODE: Used to shift the display in order to access various features.
MONITOR: Used for a hands free operation.
PAUSE: Inserts a pause in a speed dial number. With an analog proprietary telephone, it is used
as the PROGRAM button.
PF (Programmable Feature): This flexible button can be programmed to be a One-Touch
Dialing, FWD / DND, SAVE, Account, CONF (Conference) or Voice Mail Transfer button, as
desired.
PROGRAM: Used to enter / exit the Programming mode. With the KX-T7220 and KX-
T7250, it can also be used as the PAUSE button.
REDIAL: Used for Last Number Redial.
SAVE: Used to store a dialed telephone number for Saved Number Redial.
SELECT: Used to select the displayed function or to call for the displayed phone number.
SHIFT: Used to access the second level of Soft button function.
Soft: Pressing a Soft button performs the function / operation appearing on the bottom line of
the display.
SP-PHONE (Speakerphone): Used for a handsfree operation. Pressing the button causes the
telephone to switch between handset and handsfree operation.
TRANSFER: Transfers a call to another extension or external destination.
VOICE CALL: Used for extension auto-answer (handsfree conversation is not available), and
handset microphone mute during a conversation.
VOLUME: Used to adjust the ringer, speaker, handset and headset volume and the display
contrast.
Conditions
• Certain buttons are equipped with light indicators (LED's) to show line or feature status.
• CO buttons can be classified according to the following three types: Single-CO (S-CO)
button / Group-CO (G-CO) button / Loop-CO (L- CO) button
Programming Guide References
• [005] Flexible CO Button Assignment
Features Guide References
None
Features Guide
General Features
39