Panasonic KX-TD816 Features Manual page 94

General Features
The wild character " " can be entered in a DID number.
The DID extension name is displayed as follows.
D I D : T o m
Conditions
• An optional 4-DID Line Unit (KX-TD185) must be installed for this feature.
• If the destination is in the Do Not Disturb mode, or has disabled the Call Waiting mode and
is busy, the following may occur:
1) The call is sent to the IRNA destination.
2) The call is received at the corresponding CO button which only flashes. (Default)
3) The system sends a busy tone.
To select how the call is treated, refer to program "[990] System Additional Information,
Area 07 - Bit 11, 10".
• To prohibit outgoing calls from a DID line, program [605-606] Outgoing Permitted Outside
Line Assignment —— Day / Night or [614-615] Outgoing Permitted Outside Line
Assignment —— Day / Night for ISDN Extension is necessary to determine which outside
lines cannot be accessed by an extension.
Connection References
• 2.4.5 4-DID Line Unit Connection
• 2.4.6 Installing Expansion Unit
Programming Guide References
• [109] Expansion Unit Type
• [135] DID Number Conversion Selection
• [136] DID Number Assignment
• [137-138] DID Extension —— Day / Night
• [139] DID Extension Name Set
• [401] Outside Line Group Assignment
• [430] DID / TIE Format Number Assignment
• [431] DID / TIE Incoming Assignment
• [432] DID / TIE Outgoing Assignment
• [433] DID / TIE Subscriber Number Removed Digit
• [434] DID / TIE Added Number
• [435] DID / TIE Wink Time Out Assignment
• [605-606] Outgoing Permitted Outside Line Assignment —— Day / Night
• [990] System Additional Information
Features Guide References
None
94
S m i t h
Features Guide