Paper Misfeed In The Fuser Unit - Toshiba e-studio2050c Troubleshooting Manual

1.TROUBLESHOOTING FOR THE HARDWARE

Paper misfeed in the fuser unit

Be careful not to let your fingers be caught between the equipment and the duplexing unit cover or
automatic duplexing unit cover.
This could injure you.
Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the
machine.
1 Open the automatic duplexing unit cover on the right.
Press down the two green fuser pressure release
2
levers until they stop.
Open the transport guide holding the green knob and
3
then release the misfed paper. Pull the misfed paper
up or down as shown in the illustrations depending
on the position of the paper.
Pulling it up
Pulling it down
1 TROUBLESHOOTING FOR THE HARDWARE
3
2
Clearing a Paper Misfeed
1
25