Yamaha F200C Service Manual page 123

3. Remove the dipstick guide 5, and dis-
connect the fuel hose 6, PTT motor
leads 7, and flushing device hose (flush-
ing device model) 8.
4. Disconnect the fuel pump driver and iso-
lator couplers, PTT switch coupler, shift
cut switch coupler, neutral switch cou-
pler, trim sensor coupler, and cooling
water pilot hose.
69J1D11
5. Remove the upper case cover 9 and
aprons 0.
6. Remove the power unit by removing the
bolts A.
7. Remove the flywheel magnet.
È
Power unit
1
2
3
4
5
6
7
8
9
5-24