NEC VN-212 User Manual page 8

1 OPERATE
2 TV/VCR
3 AUDIO/VIDEO MODE
(AV)
4 0 to 9
5 REWIND/REVIEW (REW)
6 PLAY
7 PAUSE/STILL (P/STILL)
8 MENU (i)
9 CLK/CTR/OK
10 CURSOR ( E E D D F F G G )
11 EJECT
12 SKIP G G G G
13 EASY OFF
14 EASY REPEAT (EASY RPT) Press this button during playback to start repeat playback.
15 FAST FORWARD/CUE
(FF)
16 STOP
17 TAPE SPEED (Long Play)
18 REC/QSR
19 CLEAR
20 CHILD LOCK
8
Turns the VCR ON or OFF.
Set this button to;
VCR: To monitor, view playback or view the video recorder's tuner.
TV: To watch TV or view one programme while recording another programme.
NOTE: When you have set the TV/VCR button to TV mode, "VCR" indicator
will disappear on the Multi-Function Display.
Used to select the input signal.
Press once: AV will appear on the Multi-Function Display. AV is selected to
record or view signals from AUDIO IN, VIDEO IN on the rear panel.
Press two times: AV will disappear on the Multi-Function Display. You can
now watch or record signals from the built-in tuner.
These buttons are used to select programmes, or to set the clock and the
timer according to the guidelines displayed on the TV screen.
Press to start rewind.
Press this button during playback to see reverse playback picture at high speed.
Press to play back recorded tapes.
Press in RECORD mode to stop recording and to eliminate commercial
breaks or unwanted programme material.
Press again to resume recording.
Press in play mode to freeze the picture. Press PLAY to resume playback.
Used to enter into menu on the TV screen.
Press while the clock is displayed to show the tape counter.
The tape position will be stored in memory.
Confirms menu selection.
Calls up OSD (On Screen Display).
CH/TRK( D D / E E )
During OSD menu, for moving the cursor, selection bar up or down.
Switches one channel programme up or down.
During playback, tracking control.
During still playback, adjusting vertical tremble.
F F G G
During OSD menu, for moving the cursor to the left or right.
The cursor ( F F ) button can be used to clear data.
Press to eject a cassette.
Used to fast forward picture search through 30 seconds of recording.
Press this button during playback to turn the VCR OFF automatically.
Press to activate fast forward.
Press this button during playback to see forward playback picture at high speed.
Press to stop the tape.
Used to select the desired recording speed: SP (Standard Play) or LP (Long Play).
Press to record or to set the QSR (Quick Start Recording).
Press to reset the counter to 0:00:00.
Used to select child lock mode.