Features - NEC VN-212 User Manual

WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
Dangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or fire
hazard, remove the power cord from the AC outlet prior to
connecting or disconnecting any signal lead or aerial.
Even if the VCR OPERATE button is turned off, parts of
the unit are still connected to the mains.
CAUTION:
Disconnect the power cord from the AC outlet if you will
not be using the VCR for a long period of time.
CAUTION:
TO AVOID RISK OF ELECTRIC SHOCK, DO NOT OPEN.
NOTE:
The rating plate is located at the rear of the unit.
CAUTION:
Young children and infirm persons should be supervised
when using the appliance.

Features

CHILD LOCK
Allows the user to set the VCR from the remote control,
so that the front panel functions become inoperative,
with the exception of the STOP/EJECT button.
1-MONTH/7-EVENT PROGRAMMABLE TIMER WITH
EVERY-DAY RECORDING
The VCR can be programmed to record automatically
up to seven TV shows in the coming month. There is
also an every-day programme timer.
MULTI-FUNCTION DISPLAY
Shows the VCR status, such as play, record etc. on the Multi-Function Display.
NTSC PLAYBACK ON PAL CTV
Allows you to play NTSC video tapes from overseas on most brands of
colour television receivers capable of resolving at 60 Hz video signal.
LONG PLAY
Enables tape to travel at half speed for doubling
recording and playback time on your tapes.
SKIP SEARCH
Allows you to avoid unwanted part of programme quickly.
DIAGNOSTIC ADVISING SYSTEM
Displays an operation error message if operation fault occurs during use.
QUICK START RECORDING (QSR)
Allows the VCR to be set to automatically stop recording and shut the power off.
HQ (HIGH QUALITY) VIEW SYSTEM
The "High Quality" circuit improves image sharpness and detail.
FREQUENCY SYNTHESIZED TUNER WITH 99-CHANNEL
MEMORY AUTOMATIC FEATURES
These features will function automatically as follows:
- The power of the VCR will turn on when a tape is inserted.
- The VCR starts playback when there is no safety tab on the cassette.
- The VCR starts rewinding when the tape reaches the end.
ez(easy) OPERATIONS
Allows you to operate the VCR easily.
REAL-TIME COUNTER
Shows tape travel in hours, minutes and seconds.
FULL-FUNCTION INFRARED REMOTE CONTROL
AUTO HEAD CLEANING
2
FRONT
1 OPERATE BUTTON
This button is used to turn the unit on and off.
When this button is pressed to ON, the VCR indicator and
clock display will appear.
When this button is pressed to OFF, the VCR indicator will disappear.
NOTE: To set the VCR for unattended recordings after timer set-
tings have been completed. When the timer is programmed and
OPERATE is turned off "TIMER" appears on the Multi-Function
Display to indicate that the VCR is set for unattended recording
and cannot be operated manually. (To return to manual operation,
press the OPERATE button once. "TIMER" indicator goes off).
2 STOP/EJECT BUTTON
Press this button to stop or eject the tape.
3 CASSETTE COMPARTMENT
Insert a cassette in the compartment, loading will be completed automatically.
NOTE: Power is turned on automatically when the cassette is
loaded. If the cassette is loaded without the safety tab in place,
the video programme will play automatically (FULL AUTO PLAY).
4
REWIND/REVIEW BUTTON
Press to start rewind. Press this button during playback to
see reverse playback picture at high speed.
5
PLAY BUTTON
Press this button to playback recorded tapes.
6
FAST FORWARD/CUE BUTTON
Press to activate fast forward.
Press this button during playback to see forward playback picture at high speed.
7 P/STILL BUTTON
Press to stop recording and to eliminate commercial breaks
or unwanted programme materials in RECORD mode.
Press to freeze the picture in PLAY mode.
8 RECORD/QUICK START RECORDING BUTTON
Press for recording or setting the QSR (Quick Start Recording).
9 REMOTE SENSOR WINDOW
To receive signals from the remote control unit.
10 MULTI-FUNCTION DISPLAY
The VCR's function will be displayed on the Multi-Function Display variously.
11 CHANNEL BUTTONS ( / )
Used to move up or down through programme numbers.
REAR
MAINS LEAD
12
AUDIO IN/OUT
13
Used to connect the video recorder to your TV or
another video recorder.
AERIAL INPUT
14
Connect the external aerial to this terminal.
RF OUTPUT
15
Connect this terminal to the AERIAL terminal on the back
of the TV, using coaxial RF cable (supplied).
16 VIDEO OUT
Used to connect the video recorder to your TV or another video recorder.
17 VIDEO IN
Connect the video output from other video equipment
(such as a Video Camera) to this jack.