Status; Device Info - D-Link AC750 User Manual

Section 3 - Configuration
This screen displays the current information for the DIR-818LW. It includes the LAN, WAN (Internet), and Wireless information. If
your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use
Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a
Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect
to establish the PPPoE connection.
General:
Displays the router's Time, Firmware Version, and mydlink registration status.
WAN:
Displays the Connection Type, Cable Status, Network Status, MAC Address, and the
public IP settings.
LAN:
Displays the MAC Address and the private (local) IP settings for the router.
Wireless LAN:
Displays the 2.4GHz wireless MAC Address and your wireless settings such as Channel
and Network Name (SSID).
Wireless LAN2:
Displays the 5GHz wireless MAC Address and your wireless settings such as Channel
and Network Name (SSID).
LAN Computers:
Displays computers and devices that are connected to the router via Ethernet and
that are receiving an IP address assigned by the router (DHCP).
IGMP Multicast
Displays IPv4 and IPv6 Multicast Group Addresses.
Memberships:
D-Link DIR-818LW User Manual

Status

Device Info

104